Welcome to Newton Woodworking! We love sharing great woodworking & woodcraft plans, tips and advice for beginners & experts alike (and for everyone else in between!)!!
Tired Of Searching For Answers Regarding Woodworking? Find Them Here!
Whether you are a novice woodworker or a seasoned professional, you probably understand that knowledge is the key to working with wood. Woodworking still requires an ample amount of skill as well; however, without information and learning, those skills may not do you an good. This article hopes to pass on some great suggestions to help you enjoy woodworking.
Anytime that you are planning to stain wood, you should be sure to use a high-quality wood conditioner beforehand. These conditioners will make the finished project look better. The conditioner will let the stain apply evenly and smooth out the wood.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
Make sure you buy the right tool for the job. When you are building a wooden deck onto your house, it would be difficult to do all the cutting with a hand saw. Instead, you should cut with a circular saw. A circular saw is electric; however, a hand saw is not.
When deciding on a woodworking project, make sure you know what tools will be required to finish the project. If you are missing a tool, you may have to stop in the middle of the project and never finish. Many tools are available for rent at home improvement stores, but some you may have to purchase. This purchase could bring you well above your budget.
Organize your woodworking space. There are few things more irritating than looking for a tool when you need it, and not making any headway in the process. Missing and misplaced tools can lead to major project delays. Keeping organized is a big help. In fact, pulling out the tools that you’ll need before a project is a smart thing to do.
Apply your woodworking skills on yard projects. You can build yourself something like a deck along with a bird feeder. The birds that visit will keep insects away while you work on your next project. Also, if you work as a professional woodworker, show your clients your work by holding your meetings on your new deck.
Save time in the shop by locating the most level spot on your floor and marking it with a brightly colored duct tape. When you do this, you can quickly and easily maneuver your mobile table saw into position for board cutting. You will not have to check the level and make time consuming minor adjustments every time you want to cut a board.
Stain only provides color to wood, not finish. You will need to apply a finish coat on top of the stained wood. If you are in a hurry, or short on time, you can use a product that combines both stain and finish together. Be sure to use a higher-quality brush for this, and stain in the direction of the grain.
It is hard to imagine a world without woodworking. Those that can shape simple wood into imaginative or useful pieces are often sought after. If you hope to be successful with woodworking, or just boost your knowledge, it is hoped that this article has given you proper insight into enjoying working with wood.